Why an EVPN-VXLAN fabric
Large layer 2 networks with spanning tree do not scale well. This chapter explains why many data centres and campuses move to a routed fabric with an overlay.
Analogy: a road network with private tunnels
The roads (underlay) are plain and all open. The private tunnels (overlay) carry each tenant's traffic across them without changing the roads.
- The underlay is a routed network with equal paths between every pair of switches, so no link is blocked.
- The overlay uses VXLAN to carry layer 2 and layer 3 segments over that routed network.
- EVPN is the control plane: switches learn host addresses through routing messages instead of flooding.
- Segments can stretch to any rack or building, so a VLAN is no longer limited to one switch pair.
- The cost is more concepts to learn, so a clear design and a naming plan matter from the start.
Tenants ride an overlay on a routed underlay.
A hospital needs the same patient-device VLAN in two buildings. A fabric stretches it without a long spanning tree across the campus.
Common mistake: treating the overlay as a fix for a poor underlay. A fragile underlay breaks every overlay segment at once.
Everything breaks together
Many segments fail at one moment.
Lesson: check the underlay first.
Why use EVPN-VXLAN?
A routed underlay avoids blocked links, and the overlay stretches segments with learned, not flooded, addresses.
Key takeaways
- Routed underlay.
- VXLAN overlay.
- EVPN learns hosts.
- Stretch segments.
- Plan names.