Check Point Security Administrator · Gaia Day-One Setup

First boot and GUI access: factory login, Mgmt interface and the Gaia Portal

Day one with a new Check Point gateway: log in with the factory account, set the Mgmt interface, gateway, password, DNS and NTP, restrict the allowed clients, and open the Gaia Portal from an admin PC. Includes a "portal will not open" ticket and a hardening lab.

12 min read5 chapters3 labs12 quiz3 scenarios5 interview Q&A

This first module is free: read the lesson and take the quiz. Labs need an account: sign up free to run up to 3 hands-on labs.

Log inStart free trial
This reading material cannot be printed. Read it on config.nwkings.com.
01

A new Check Point gateway: Mgmt port, console and factory logins

Where this module fits. The Gaia module starts with a gateway that is already reachable. On day one nothing is reachable yet: you have a box (or a virtual machine), a console and a Mgmt port. This module covers the first hour: log in, give the Mgmt port an address, secure the admin account and open the Gaia Portal.

Analogy: the staff door and the customer doors

A gateway has traffic interfaces (the customer doors, where networks connect) and a Mgmt interface (the staff door, used by administrators). Most day-one mistakes come from mixing the two up.

Three ways to manage a Gaia system

ToolWhat it isUsed for
clishThe Gaia command line (default shell)Interfaces, routes, users, DNS, NTP, web settings
Gaia PortalWeb interface of the operating system on https port 443The same OS settings as clish, in a browser
SmartConsoleDesktop client that talks to the Security Management ServerObjects, policy, NAT, logs (covered in the later modules)

The Gaia Portal and SmartConsole are different tools. The portal configures the operating system; SmartConsole configures the security policy.

Factory defaults (as modelled in the simulator)

ItemValue
Mgmt interfaceeth0 at 192.168.1.1/24
Administratoradmin / admin (a new password is forced before the portal opens)
Allowed clientsany host

Real appliances run a First Time Configuration Wizard, in the portal or on the console, to set the password, the Mgmt address and the role (gateway, management server). The simulator does the same work with clish commands.

Key takeaways: clish, Gaia Portal and SmartConsole are three different tools. Factory: Mgmt 192.168.1.1/24, admin / admin, password change forced. Keep the Mgmt interface separate from traffic interfaces.

Upgrade to keep reading

The free plan lets you read chapter 1 of this module. Upgrade to open the remaining chapters.

  1. Mgmt address, gateway, password, DNS, NTP and allowed clients
  2. Opening the Gaia Portal, and fixing it when it will not open
  3. Troubleshooting a gateway that will not open
  4. Summary and day-one checklist

Join the community