Arista Data Center Engineering Specialist · Independent certification preparation

First access: management port, administrator and the HTTPS eAPI

Day one with a new EOS switch: address the out-of-band management port, create a named administrator, switch on the HTTPS eAPI and call it from an admin PC, then fix a ticket where the API is unreachable and harden it (no cleartext HTTP, a read-only account).

12 min read5 chapters3 labs12 quiz3 scenarios5 interview Q&A

This first module is free: read the lesson and take the quiz. Labs need an account: sign up free to run up to 3 hands-on labs.

Log inStart free trial
This reading material cannot be printed. Read it on config.nwkings.com.
01

A new EOS switch: how you reach it on day one

Where this module fits. The EOS modules start with a switch you can already log in to. On day one you have a box, a console and a laptop. This module covers the first hour: the management port, a named administrator and the HTTPS eAPI.

Analogy: the back door of a data centre

Data-plane ports carry production traffic. The Management1 port is the staff entrance: a separate routed port you address first so that you, and later automation, can reach the box without touching production.

Note on a "GUI"

EOS has no on-box web GUI. The programmatic front door is the eAPI (JSON-RPC over HTTPS at /command-api); the graphical console for a fleet is CloudVision. Day one is about the eAPI.

switch> enable
switch# show version

This is an educational simulator. Behaviour follows common EOS practice but is not Arista software.

Upgrade to keep reading

The free plan lets you read chapter 1 of this module. Upgrade to open the remaining chapters.

  1. Addressing Management1 and testing from a laptop
  2. A named administrator and the HTTPS eAPI
  3. Troubleshooting and hardening the eAPI
  4. Summary and day-one checklist

Join the community