JNCIE-SP · Lab strategy

The 8-hour JNCIE-SP lab: format, objectives and time plan

How the eight-hour practical is run and graded, what the four mock labs cover, a time plan, and what the simulator does not model.

15 min read4 chapters0 labs
This reading material cannot be printed. Read it on config.nwkings.com.
01

The 8-hour lab at a glance

The JNCIE-SP practical (JPR-960 format) is one eight-hour, hands-on lab on a network of Junos devices. There is no separate design module and no multiple-choice part: you read a set of requirements and configure and troubleshoot the devices until the network does what the requirements say. It is delivered at Juniper test centres and, for some tracks, remotely proctored.

WhatHow it works
Length8 hours, one session.
TasksConfiguration and troubleshooting requirements grouped by topic. Some build on earlier ones, many do not.
GradingThe final state of the devices is graded against each requirement. Partial work on a requirement usually scores nothing.
PrerequisiteA current JNCIP certification in the same track.
TopicsIS-IS and OSPF in a provider core, BGP with route reflection and policy, MPLS with LDP and RSVP-TE, Layer 3 and Layer 2 VPNs, class of service, multicast and high availability on MX routers.

Always check the official Juniper exam objectives and the candidate guide before you book: devices, software versions and topics change between releases. This track is independent training with original lab designs; it is not Juniper software or exam content.

Upgrade to keep reading

The free plan lets you read chapter 1 of this module. Upgrade to open the remaining chapters.

  1. What the mock labs cover
  2. A time plan for eight hours
  3. How to use the four mock labs

Join the community