Juniper SRX (JNCIS-SEC) · SRX Day-One Setup

First boot and J-Web access: root password, management address and the web interface

Day one with a new SRX: log in as root with no password, set the root password, hostname and management address, create a named admin, and open J-Web from an admin PC. Includes a "J-Web will not open" ticket (zone host-inbound-traffic and the web-management interface) and a hardening lab.

12 min read5 chapters3 labs12 quiz3 scenarios5 interview Q&A

This first module is free: read the lesson and take the quiz. Labs need an account: sign up free to run up to 3 hands-on labs.

Log inStart free trial
This reading material cannot be printed. Read it on config.nwkings.com.
01

A new SRX: console, factory state and what J-Web is

Where this module fits. The Junos modules start with a device you can already reach. On day one you have a box (or vSRX), a console and a cable. This module covers the first hour: console login, the root password, a management address, a named administrator and J-Web.

Analogy: the new office with no keys

A factory-fresh SRX is an office with an open door and no keys cut yet. Anybody can walk in at the console as root with no password, and the configuration will not even commit until you set one. That one rule explains most of the first hour.

Factory state (as modelled in the simulator)

ItemValue
Management accessge-0/0/1 at 192.168.1.1/24 in the trust zone
J-Webenabled on ge-0/0/1 over https
Root loginconsole login root, no password
Accounts that can sign in to J-Webnone until a password is set

Real branch SRX models ship with a similar factory-default configuration, and larger or virtual models use the fxp0 management port instead. The simulator lets the lab choose which port the admin laptop is cabled to.

CLI and J-Web

The Junos CLI has two modes: operational mode (>) and configuration mode (#, entered with configure). Changes live in a candidate configuration until you commit. J-Web is the web interface that edits the same configuration in a browser.

Key takeaways: factory root has no password and nobody can commit until one is set. Factory management: ge-0/0/1 192.168.1.1/24, J-Web on https. Candidate, then commit.

Upgrade to keep reading

The free plan lets you read chapter 1 of this module. Upgrade to open the remaining chapters.

  1. Root password, hostname, management address, users, DNS and NTP
  2. Opening J-Web: web-management and the security zone
  3. Troubleshooting J-Web from the bottom up
  4. Summary and day-one checklist

Join the community