CCNP Wireless · WLC Day-One Setup

First boot: management interface, local administrator and the web UI

Day one with a new Catalyst 9800-style controller: build the wireless management interface, create a privilege-15 administrator, turn on the HTTPS web UI with local authentication and sign in from an admin PC. Includes a "web UI will not open" ticket and a hardening lab with a monitoring-only account.

12 min read5 chapters3 labs12 quiz3 scenarios5 interview Q&A

This first module is free: read the lesson and take the quiz. Labs need an account: sign up free to run up to 3 hands-on labs.

Log inStart free trial
This reading material cannot be printed. Read it on config.nwkings.com.
01

A new 9800 controller: how you reach it on day one

Where this module fits. The wireless modules assume a controller you can already manage. On day one you have a freshly installed controller, a console and an admin laptop. This module covers the first hour: the wireless management interface, a named administrator and the HTTPS web UI.

Analogy: the reception desk

The web UI is the reception desk of the controller. Before anyone can walk up, the building needs an address (management interface), a door that is unlocked (HTTPS server) and a list of who may enter (local users and the authentication method).

The four things you need

  • A management VLAN and an SVI with an IP address.
  • The wireless management interface pointing at that SVI.
  • A local user with privilege 15 for full access.
  • The HTTPS server and local web authentication switched on.

Until all four exist the browser shows nothing. The sections that follow take them one by one.

Upgrade to keep reading

The free plan lets you read chapter 1 of this module. Upgrade to open the remaining chapters.

  1. The wireless management interface
  2. A named administrator and the HTTPS web UI
  3. Troubleshooting and hardening
  4. Summary and day-one checklist

Join the community